Section 1: Identification
Product Name: Akron RTV-RP™ Silicone Mold Rubber, Part B, catalyst
Manufacturer: Zero-D Products, Inc.
37939 Stevens Blvd.
Willoughby, OH 44094
Phone: (440) 942-5005 or (800) 382-3229
Recommended Use: Room temperature cure mold rubber for lost wax casting.
Section 2: Hazard(s) Identification
This product is non-hazardous according to the U.S. Department of Transportation code of Federal Regulations.
Fire and Explosion: Not considered flammable or combustible, but will burn if involved in a fire. Contact with acidic, basic or oxidizing materials generates flammable and explosive hydrogen gas.
Skin contact: May cause slight irritation, but no significant effect.
Eye Contact: May cause slight eye irritation.
Not suited for medical use. Do not insert into body.
Section 3: Composition/Information on Ingredients
Chemical Name: CAS#:
Mixture no hazardous materials present.
Chemicals are contained in the mixture of which is considered non-hazardous. Some specific chemical identities are being withheld as a trade secret. Specific quantities are not listed as this can vary from batch to batch and this is also considered to be our trade secret. Quantities are below what is considered to be a health risk.
Section 4: First-Aid Measures
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes. If irritation persists, get medical attention.
Skin Contact: Remove product with a dry cloth, wash with soap and water
Ingestion: Wash out mouth with water, provided person is conscious. Never give anything by mouth to an unconscious person. Seek immediate medical care when necessary.
Special Precautions/Procedures: Use good hygiene controls. Wash hands thoroughly after handling before eating or smoking.
Section 5: Fire-Fighting Measures
Flash Point: 190°C (302°F) -Open Cup Method
Extinguishing Media: Foam, Dry Chemical, Carbon Dioxide
Use all necessary protective fire-fighting equipment such as gloves, face shield, respirator
Section 6: Accidental Release Measures
Spill or leak: Contain spill or leak. Scrape with cardboard or rag, place in container. In such a case, pay attention to generation of hydrogen gas by contaminants. If material is contaminated and can’t be used or chemically reprocessed dispose at an approved facility in accordance with any applicable regulations under the Resource Conservation and Recovery Act (RCRA).
Section 7: Handling and Storage
Use good hygiene controls. Wash hands thoroughly after handling before eating or smoking.
Do not store around food stuffs.
Do not eat or smoke while handling material.
Keep container closed when not in use. Do not lay container on side. Store this material in a cool dark environment away from heat source. Keep away from heat, sparks and flame.
Avoid Contact with acidic, basic or oxidizing materials.
Section 8: Exposure Controls/ Personal Protection
Ventilation: Not Required.
Respiratory Protection: Not Required
Protective Clothing/Equipment: Wear protective gloves to prevent prolong or repeated skin contact. Plastic film, latex or vinyl gloves.
Eye Protection: Safety glasses or goggles.
Other Protection: Eyewash equipment.
Comments: Avoid contact with eyes and prolong or repeated skin contact. To prevent illness from exposure, never eat, drink or smoke in work area. Practice good personal hygiene after using this material, especially before eating, drinking, smoking, using the toilet, or applying cosmetics. Avoid contact with acidic, basic or oxidizing materials.
Section 9: Physical and Chemical Properties
Color: Transparent, Clear
Specific gravity: 0.99 (25°C)
Vapor Pressure: Negligible (25°C)
Evaporation Rate: Negligible (Butyl Acetate=1)
Solubility in Water: Not soluble
Section 10: Stability and Reactivity
Chemical Stability: Unstable
Incompatibility (materials to avoid): Acidic, basic or oxidizing materials.
Hazardous Polymerization: May occur.
Hazardous decomposition or By-Product: Flammable hydrogen gas
Conditions to avoid: Contact with acidic, basic or oxidizing materials.
Section 11: Toxicological Information
Skin Irritation: No evidence or irritation
Chronic Toxicity: No information available
Eye Irritation: No evidence of eye irritation
Chronic Effects: None
Section 12: Ecological Information
No tests have been performed. No information available.
Section 13: Disposal Considerations
Material can be burned in a chemical incinerator equipped with an afterburner and scrubber. Do not dispose of the emptied container unlawfully. Observe all federal, state and local laws.
Section 14: Transport Information
Non Hazardous by road, air, rail or sea
No special handling needed. For transportation purposes, this product is non-hazardous according to the US Department of Transportation code of Federal Regulations.
Section 15: Regulatory Information
Section 16: Other Information
For Industrial Use Only
This safety data sheet is offered solely for your information, consideration and investigation. The data described in this SDS consist of data on literature, our acquisition data and analogical inference by data of similar chemical substances or products. Zero-D Products, Inc. provides no warranties either expressed or implied, and assumes no responsibility for the accuracy or completeness of the data contained herein.
Created new on 6/19/14 by
Zero-D Products, Inc.
37939 Stevens Blvd.
Willoughby, OH 44094
Ph. (440) 942-5005