Additional items for AN enhanced molding experience.

Explore a range of specialized mold making companions designed to cater to your unique needs. We have several added quality items to help enhance your mold making process.
mold locators
These mold locator nuts are sold in packs of 1,000 pcs. Mold locators are used to ensure proper alignment of the mold and to prevent shifting of the mold during casting or wax injection. Available Size
  • 1,000 pieces Jar
  • 3 Jar Case
Contact us
Akrovest™ Wax wash
Debubblizer designed for use in vacuum investing to prevent bubbles from adhering to the castings. Can be used wet or dry.
  • Non-hazardous
  • Non-foaming
  • No alcohol
  • Ships normal ground service
Available Size
  • One Gallon Jug
  • 8 ounce spray bottle
SDS
Akron Ultra™ Metal Mold beads
The lowest expanding plastic injection bead available today! Crystal clear plastic. Will not crack your investment. Injection temperature between 290°F-310°F Casting burnout cycle: 350°F for 2 hours 1450°F for 8 hours Available Size
  • 2.27 kg. (5 lb.)
  • 11.34 kg. (25 lb.)
  • 18.14 kg. (40 lb.)
TECHNICAL DATA
AKRON ULTRA COBALT BLUE DYE™

The perfect dye for coloring our Akron Ultra Metal Mold Beads™. The powder is fine so blending is silky smooth. Add the dye to the beads in a container and shake before melting. Just be careful not to make a mess with this stuff. Available Size
  • 0.454 kg. (1 lb.) Jar
Contact us
Gypsof™
investment remover powder. Softens and dissolves gypsum based investment when mixed with water. Also acts as a pickle agent to remove oxides and brighten castings. Perfect cleaner to use in casting area for removing dried investment from mixing bowls and utensils. Available Size
  • 0.45 kg. (1 lb.)
  • 2.27 kg. (5 lb.)
  • 4.55 kg. (10 lb.)
  • 18.14 kg. (40 lb.)
Instructions
TALC release powder
Talc powder serves as a parting agent for powder separation molding technique. Can be used as a release agent for wax injection. Our new generation talc formula is extremely fine, soft and optimized for minimal dust. Available Sizes
  • 0.907 kg. (2 lb.) Jar
  • 11.36 kg. (25 lb.) Box
  • 18.14 kg. (40 lb.) Box
Contact us
Teflon Spray
Camie A1000 Dry PTFE Spray
Dry teflon lubricant release agent for use in molding. For Easy release of mold frame spray A1000 on frame before molding.The propellant is wet but the teflon is dry. Be sure to allow the spray to dry before packing or pouring silicone mold. Available Size Net Weight 13 ounces (369 grams) per can
  • Single can
  • 2 can pack
  • 12 can case
Contact us
Silicone spray
Camie 999 Dry Silicone General purpose spray lubricant. Works well with all Akron Jewelry Rubber™ grade rubbers as an added release for wax injecting. Spray the mold before injecting. Be sure to allow the spray to dry before shooting waxes into rubber. Available Sizes Net Weight 13 ounces (369 grams) per can
  • Single can
  • 2 can pack
  • 12 can case
Contact us